bob
New Member
Posts: 3
|
Post by bob on Oct 30, 2009 15:29:48 GMT -7
Hey Guys,
Im using a 63 frame for a rat rod were building,, whats the best way to drop the rear like on the ground? Using trailing arms.
|
|
|
|
Post by Scooter3 on Oct 30, 2009 18:14:02 GMT -7
If you want it crazy low like dragging the ground stuff you pretty much have to C-Notch the frame rails. Then most people put an air bag system on them so they can lift them back up to a managable ride height. If you just want to lower it say 5-6 inches just get drop springs. Theres a couple of things that go along with doing it either way like a longer or adjustable pan hard bar and shock relocating. The big thing with the C- Notch besides just cutting the frame is you have to raise the level of the bed floor or cut a hole in it so it clears the frame. I guess you can do the C-Notch with out bags but you had better be careful when driving it. Hope this helps  |
|
anyone know if its possible to turn my c10 into 4x4 ?