|
|
Post by rpm605 on Jan 6, 2013 10:22:36 GMT -7
I have a 1964 1/2ton chev truck. 2 wheel drive. I want to convert from drum to disk. what are some donor year trucks that will be interchangeable? is it best to just buy all new parts or try to find the correct donor vehicle? The truck is not a rotting disaster but far from mint!
|
|
|
|
Post by 406rich on Jan 6, 2013 21:48:05 GMT -7
`73 to `87 c10 or sub, you don`t need to change you crossmember unless you want to, just grab spindles, rotors, caliphers, lines, master, booster and prop valve, use the newer balljoints on your `64 control arms, and newer tierod ends, if you go to power steering you`ll need to get a plate from CCP...
|
|
|
|
Post by mrwhiplash on Apr 23, 2013 4:01:57 GMT -7
I'm also in need of front disc brake conversion. I have a 60' apache10 w/ the independent front suspinsion. What's the best route disc brake conversion kit or donor vehicle? If I go do now route, what's the best vehicle to use to upgrade my 60'? Thanks
|
|
|
|
Post by mrwhiplash on Apr 23, 2013 4:03:02 GMT -7
Donor* route
|
|
|
|
Post by davesgarage on Apr 27, 2013 20:02:18 GMT -7
Check out the Truck and Car Shop in Orange California, they have everything
|
|
jrlj
New Member
Posts: 1 
|
Post by jrlj on Feb 20, 2014 8:36:36 GMT -7
How about a rotor for the mid 70's with 5 on 4 3/4 bolt pattern?
Where does the 3" wider spread come from? Spindles, A Arms, spindles, or rotors?
If I wanted the stock width can it be done with the 79 front suspension?
|
|
anyone know if its possible to turn my c10 into 4x4 ?