|
Post by joesscamaro on Jul 18, 2008 7:57:20 GMT -7
I was just wondering if anyone in here has used the rear mount gas tank from LMC on their trucks? I bought one and I'm going to install in tomorrow. Just curious if anyone else has used this same set up? And if you have and have any suggestions or any advice...that would be appreciated as well. Thanks.
|
|
|
Post by forcedinduction on Jul 24, 2008 9:51:14 GMT -7
Installed the rear tank kit on my 66 longbed. Easy stuff and straight forward install.
|
|
|
Post by joesscamaro on Jul 31, 2008 7:22:09 GMT -7
That's good to hear. I got all the hard lines and rubber lines and clamps and everything I'll need for the install. Just trying to find the time.
|
|
|
Post by meanmadmaxwell on Dec 1, 2009 17:17:29 GMT -7
I found a rear tank from a newer model chevrolet pickup. Bought some gas hose and some wire. It fit like a glove and cost me a grand total of $50. They used the same frame on the trucks for so long you can find a gas tank out of almost any Chevy that will fit.
|
|
|
Post by ajofarizona on May 24, 2010 20:12:11 GMT -7
What truck tanks will work in the rear mount kit. Trying to figure out if i should shell out the green or grab a used tank.
|
|
zor
New Member
Posts: 45
|
Post by zor on May 28, 2010 11:01:10 GMT -7
Did any of the late model trucks run the tank in front of the axle. I'm running bags and trying to mount everything under the bed that I can. It's like playing tetris.
|
|